TL201-1 - JASPER ELECTRONICS TL201-1 200 – 400 WATT SINGLE AND MUTLIPLE...
- Part Number:
- TL201-1
- Model Number:
- TL201-1
- Make:
- JASPER ELECTRONICS
- Lead Time:
- Available
- Qty In Stock:
- Available
JASPER ELECTRONICS TL201-1 200 – 400 WATT SINGLE AND MUTLIPLE OUTPUT Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- >0.99 Line Power Factor Corrected
- 1U High
- AC/Power Good LED Display
- Fan Cooled – Optional
- International Safety Approved
- Single Wire Current Sharing
- UL, CE, cULus Approved
Specifications
- Cooling: At least 10 cfm direct air flow required to achieve full rating power and specified MTBF.
- Current Share/Parallel N+1 Operation: Load sharing within 10%by single wire connection on V1 and aux. output with lo>5A.
- Dynamic response: (with 25 % load change, at 1A/usec) Less than 3% deviation. Output returns to within 1% in less than 300 usec.
- EMI: Meets CISPR22B level B, and EN 55022 level B.
- Hold-up time: >20 msec at full load.
- Immunity: Complies with EN 50082-1, IEC 802-2,3,4.
- Input Operating Range: 90 – 264 VAC, single phase 47-63 Hz. Internally fused for 6.3A
- Input Transient Protection: MOV Protection. Withstands transients as specified by EN61000-4.5.
- Inrush Limiting: Thermistor soft start 15A peak at 115 VAC, 25 C. (Cold Start30 A peak at 230 VAC, 25 C. (Cold Start)
- Minimum Load Efficiency: 70% Typical
- MTBF: Designed for 150,000 hour.
- Operating Temperature: 0 to 50oC at full load
- Operating Vibration: 0.75 G peak, 5-500Hz along three orthogonal axis.
- Overshoot: None for turn-on or turn-off.
- Power Factor: > 0.99 power factor at full power
- Relative Humidity: Up to 90% RH non-condensing.
- Remote sense: .5V of cable loss on V1 and V2 (lo >5A)
- Ripple & Noise (PARD): 50mV or <1% peak-peak nominal, whichever is greater, at output terminals with 20 Mhz bandwidth limit, may be measured with 0.1uF ceramic capacitor
- STABILITY: <0.2% after 20 minutes warm-up.
- Storage Temperature: -40 to 85oC
- Temperature Coefficient: < +0.02%, per degree C, 0-50oC, after 20 minutes warm-up.
- Turn-On Time: < 2 sec from AC turn on. < 100 msec from remote on/off.
Applications
- None Available
Aliases
- None Available
